رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Four additional apertures are located on the shim one 1n each corner at 0.730 in. Min.-0.750 in. Max. From the edge on both the length and width sides and are the same size as the center aperture; additionally four bolt holes are centered one on each side at 1.790 in. Min.-1-810 in. Max.From each edge and 0.590 in. Min.-0.610 in. Max. In from the corresponding edge; all measurements indicate hole centers
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.182 inches and 0.192 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 3.595 inches and 3.605 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 3.595 inches and 3.605 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
Between 1.177 inches and 1.197 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
Between 3.190 inches and 3.210 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
Between 3.190 inches and 3.210 inches
Outside Edge To Bolt Hole Center Distance Along Width:
Between 0.190 inches and 0.210 inches
Outside Edge To Bolt Hole Center Distance Along Length:
Between 0.190 inches and 0.210 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
8
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Nonseparable
MRC:
The structural characteristic of the item.CQCF
Construction:
One-piece
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-5541, class 1a military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular w/bolt holes
