رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Fs 317.0 to fs347.0, temp condition t3, material clad
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Square or rectangular recess
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.3594 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
8.500 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
29.820 inches
MRC:
An inside measurement taken at right angles to the length of an item,in distinction from thickness.ADJT
Inside Width:
6.500 inches
MRC:
A measurement of the longest inside dimension of an item,in distinction from width.ADJU
Inside Length:
1.320 inches
Hole Quantity Along Width:
12
Distance Between Holes Along Length:
5.860 inches and 3.490 inches and 3.650 inches
Distance Between Holes Along Width:
7.500 inches and 5.860 inches
Distance From First Hole Centerline To End Along Length:
18.880 inches
Distance From First Hole Centerline To End Along Width:
8.000 inches
First Recess Inside Height:
0.410 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Hc-130 hercules airplane
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/5 federal specification single material response
