رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Two 1.000 in. Od bosses extending 1.062 in. Above top of cover are located 1.250 in. From on end, each 1.750 in. On opposite sides of lg center line, each boss has 0.312 in. Id hole drilled to 1.000 in. Depth with 3/8-16 unc thd portion to 0.625 in. Depth
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Square or rectangular recess
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.406 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
6.000 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
1.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
8.500 inches
MRC:
An inside measurement taken at right angles to the length of an item,in distinction from thickness.ADJT
Inside Width:
4.000 inches
MRC:
A measurement of the longest inside dimension of an item,in distinction from width.ADJU
Inside Length:
6.500 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.500 inches
Hole Quantity Along Length:
2
Hole Quantity Along Width:
6
Distance Between Holes Along Length:
3.750 inches
Distance Between Holes Along Width:
2.500 inches
Distance From First Hole Centerline To End Along Length:
0.500 inches
Distance From First Hole Centerline To End Along Width:
0.500 inches
First Recess Inside Height:
0.125 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
0.125 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.188 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Iron cast
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Air compressor, reciprocating, power driven
