رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Flight safety critical
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.575 inches and 2.610 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
13
MRC:
The length of a straight line which passes through the center of a gear,and terminates at the outside circumference.AJWS
Gear Outside Diameter:
0.869 inches
MRC:
Indicates the type of shaft end provided.ANJS
Shaft End Type:
Cross drilled unthreaded, keyway flat, threaded external and plain
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
Between 0.550 inches and 0.570 inches
MRC:
Indicates the type of shaft included on the item.CRSJ
Shaft Type:
Shouldered
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
20.0000 degrees
MRC:
The chemical compound or mechanical mixture properties of which the shaft is fabricated.CYEQ
Shaft Material:
Steel
MRC:
The chemical compound or mechanical mixture properties of which the gear is fabricated.CYER
Gear Material:
Steel
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the largest circumference.CYET
Shaft Largest Diameter:
0.750 inches
MRC:
Indicates the location of the gear on the shaft.CYEU
Gear Location On Shaft:
Off center between ends of shaft
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the longer of two shaft segments.CYEV
Longer Shaft Segment Length:
Between 1.335 inches and 1.350 inches
MRC:
Designates the size of the shaft end included on the item.CYEW
Shaft End Size:
0.438 inches
