رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Left hand usage; heat treatment: mil-h-6088, t-76 cond
MRC:
The process used in manufacturing the item.AARN
Fabrication Method (non-core):
Cast
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Countersunk
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
0.880 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
6.752 inches
Second Leg Width:
4.123 inches
Second Leg Corner Radius:
0.440 inches
First Leg Hole Diameter:
Between 0.271 inches and 0.278 inches
Second Leg Hole Diameter:
Between 0.271 inches and 0.278 inches
Second Leg Distance Between Lower Hole Centers Along Width:
3.243 inches
Second Leg Distance Between First And Second Hole Centers Along Width:
1.809 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.125 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.125 inches
First Leg Width:
5.250 inches
First Leg Corner Radius:
0.250 inches
First Leg Distance Between Hole Centers Along Width:
0.750 inches
First Leg Distance From Edge To Hole Center Along Width:
0.320 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Corner radius
First Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 7075
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/13, 0 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type 2 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
