رقم الجزء 375-40-45ITEM

Headless Shoulder Pin

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 336.74 and 454.599 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
375-40-45item
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
No qup EA
NIIN:
012996738

معلومات الجزء
In shoulder end drill three 0.344 inch diameter longitudinal holes, equally spaced on a 1.500 inch diameter circle circumscribed around axial center, first hole 5.938 inches depth intersecting 0.344 inch diameter perpendicular hole, tap with 0.125 national pipe thread, second hole 9.625 inches depth intersecting additional 0.344 inch diameter perpendicular hole equidistant 3.688 inch distance between holes, tap with 0.125 national pipe thread, third hole 13.312 inches depth intersecting 0.344 inch diameter perpendicular hole tap with 0.125 national pipe thread; all three perpendicular holes 1.938 inches depth; two symmetrical grooves parallel to shoulder end 1.125 inches from end, 0.531 inch width by 1.000 inches depth; keyway 0.375 inch width 0.250 inch depth 1.625 inches length with a full radius corner

NSN
رقم المخزون الوطني:
5315-01-299-6738 5315012996738
TXT
وصف:
Headless Shoulder Pin
INC
INC
رمز اسم العنصر:
16749
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Chamfered
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
1.156 inches
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
1.156 inches
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
Between 4.999 inches and 5.000 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 4.705 inches and 4.716 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
19.250 inches
MRC:
None.ABPC
Undercut Width:
0.156 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Both end drilled
MRC:
None.ABRC
First Hole Diameter:
0.344 inches
MRC:
None.ABRD
Second Hole Diameter:
0.344 inches
MRC:
None.ABRE
Distance From Centerline Of Hole To End Of Pin:
5.750 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
7.375 inches
MRC:
None.AMCS
First End Taper Length:
0.125 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
12
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
Indicates the location of the first end.CRDY
First End Location:
Shoulder end
MRC:
None.CRMG
First End Taper Angle:
45.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches shoulder outside diameter
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4340
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Undercut

{lang[cimilar]} Headless Shoulder Pins

« Nails, Machine Keys and Pins {lang[catalog]}
قارن الآن»
واضح | أخفى