رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Drilled and tapped through top of cover, 0.125-27 npsf
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.656 inches
MRC:
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.AAVL
Pilot Diameter:
Between 3.869 inches and 3.872 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
5.250 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
Between 0.557 inches and 0.562 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
5.250 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.625 inches
Distance Between Holes Along Length:
4.000 inches
Distance Between Holes Along Width:
4.000 inches
Distance From First Hole Centerline To End Along Length:
0.625 inches
Distance From First Hole Centerline To End Along Width:
0.625 inches
Pilot Height:
Between 0.182 inches and 0.187 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Paint
