رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
5.460 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 2.500 inches and 2.502 inches
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
2.500 inches
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
5.460 inches
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
2.500 inches
MRC:
An indication of whether or not a guide is included.AQWM
Guide:
Included
MRC:
The physical configuration of the item.ARJD
Design Form:
Plain
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Straight
MRC:
The number of grooves provided.AXHQ
Groove Quantity:
1
MRC:
An indication of whether or not a counterbore feature is included.AXND
Counterbore Feature:
Not included
MRC:
The means of lubrication applied to the item.BDFC
Lubrication Mode:
No visible means
MRC:
Indicates the position of the groove(s) on the item.BDRB
Groove Position:
Located in center
MRC:
Indicates the type of guide provided.BMHW
Guide Type:
Groove
MRC:
An indication of whether or not a keying facility is included.BSGG
Keying Facility:
Not included
MRC:
An indication of whether or not a lightening hole/s/ is included.BXSJ
Lightening Hole:
Not included
MRC:
Designates the belt,chain,or film size for which the item is designed.BYFH
Belt/chain/film Size For Which Designed:
Silent chain
MRC:
The number of rows of teeth provided.BYFL
Teeth Row Quantity:
1
MRC:
The number of teeth included in each row.BYFN
Teeth Quantity Per Row:
17
MRC:
The means used to test the rated hardness of an item.BYFQ
Hardness Rating Test Method:
Not rated
MRC:
An indication of whether or not a bore bearing is included.BYFS
Bore Bearing:
Included
MRC:
The center to center distance between teeth measured along the pitch line.BYGF
Tooth Pitch:
1.000 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, mil-s-890, class b
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-890, class b military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain
