رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
R0.015 in.Min 0.025 in. Maximum wide, 0.044 in.Min 0.056 in. Maximum deep grinding relief under head on first shoulder and 0.033 in.Min 0.037 in. Maximum hole through shoulder 0.082 in. Min 0.102 in. Maximum from centerline of hole to end
TXT
وصف:
Headed Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
Under Head Length:
Between 0.460 inches and 0.480 inches
First Step Diameter:
Between 0.179 inches and 0.181 inches
First Step Length:
Between 0.062 inches and 0.072 inches
Second Step Diameter:
Between 0.1395 inches and 0.1400 inches
Second Step Length:
Between 0.166 inches and 0.180 inches
Third Step Diameter:
Between 0.0835 inches and 0.0840 inches
Third Step Length:
Between 0.218 inches and 0.242 inches
First End Taper Length:
Between 0.010 inches and 0.030 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
45.0 rockwell c and 50.0 rockwell c
First End Taper Angle:
Between 43.0 degrees and 47.0 degrees
Pin Head Diameter:
Between 0.245 inches and 0.255 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
10.0 microinches large shank
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.050 inches and 0.070 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 615
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5616 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
