رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Strict dimensional parameters, performace parameters, and tension/compression tolerances
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.920 inches and 0.940 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.350 inches and 0.410 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.290 inches and 0.300 inches
First Flat Length:
Between 0.860 inches and 0.890 inches
Flat Height:
Between 0.090 inches and 0.110 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.069 inches and 0.074 inches
MRC:
A measurement from the bottom of the mounting hole to the surface of the item.ACJD
Mounting Hole Depth:
Between 0.090 inches and 0.110 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
The distance from the center of the mounting hole to the end of the item.CRYW
Distance From Mounting Hole Center To End:
Between 0.090 inches and 0.170 inches
MRC:
The physical configuration of the starting edge of the item.CSPJ
Starting Edge Shape:
Straight
MRC:
Indicates the type and number of mounting holes provided on the item.CTQY
Mounting Hole Type And Quantity:
1 plain
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-6758 cond f4 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Stepped
