رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Requires clamp block halves p/n -103 & -105 which are fastened together& stocked as one part
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.850 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.750 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.000 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.208 inches and 0.214 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
2
Distance From Center Of Mounting Hole To Edge Along The Width:
0.370 inches
Center To Center Distance Between First And Second Mounting Holes:
2.240 inches
MRC:
The facility for mounting the item.AZGM
Mounting Facility:
Unthreaded hole
MRC:
A measurement from the bottom to the top of a block,in distinction from depth.BYGG
Block Height:
0.370 inches
MRC:
The number of clamping holes provided.CWTD
Clamping Hole Quantity:
5
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
0.249 inches all holes and 0.255 inches all holes
Distance From End To First Mounting Hole Center:
0.810 inches
Distance From End To First Clamping Hole Center:
0.370 inches
Center To Center Distance Between First And Second Clamping Holes:
0.870 inches
Center To Center Distance Between First And Third Clamping Holes:
0.870 inches
Center To Center Distance Between First And Fourth Clamping Holes:
2.240 inches
Center To Center Distance Between First And Fifth Clamping Holes:
3.110 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic phenolic and cotton
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-p-15035 type fbe military specification all material responses
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
