رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Sensitivity hemispherical, latching; g range 2 - 20 g's porm 10 pct; insulation resistance 500 megs min at 500 vdc; contact rating 5 amps at 28 vdc, 5 amps at 125 vac; contact resistance less than 0.5 ohms; manual push button reset; spst contact type; termination connector mil-c-26482, ser 1; seal hermetica, 1.0e-5 cc/sec 90 nitrogen, 10 pct helium; altitude method 500.3-proc 1; high temp method 501.3 proc 1 and 2, low temp method 502.3 proc 1 and 2; temp shock method 503.3 proc 1 and 2; humidity method 507.3 proc 1 cycle 1; salt fog method 509.3 proc 2; sand and dust method 510.3 proc 1 and 2 for 4 hours; explosive atmos method 511.3 proc 1; vibration method 514.2; shock method 516.2 proc 1
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.500 inches
MRC:
A measurement from the bottom to the top of the body,in distinction from depth.ADAU
Body Height:
1.200 inches
MRC:
The longest distance between mounting centers parallel to the horizontal plane.AFDS
Longest Horizontal Distance Between Mounting Centers:
2.630 inches
MRC:
The shortest distance between mounting centers parallel to the horizontal plane.AFDT
Shortest Horizontal Distance Between Mounting Centers:
1.750 inches
MRC:
The means of attaching the item.AXGY
Mounting Method:
Unthreaded hole
MRC:
The general configuration and relative position of the facilities provided for mounting the item.CQYJ
Mounting Facility Pattern:
Four position rectangular
MRC:
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.CTZB
Contact Voltage Rating In Volts:
125.0 ac at altitude second voltage
MRC:
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.CTZB
Contact Voltage Rating In Volts:
28.0 dc at altitude first voltage
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular w/mounting lugs
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Calibration setting is adjusted when the units are mounted flat; for upward and downward acceleration sensing the unit is to be mounted at 45 deg; when mounted at 45 degrees the acceleration trigger level will obey the law of cosines; axes unidirectional
