رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Both spring ends have a end length of 0.160 inches from a fourth bend to end; all bends of ends are parallel to outside diameter of spring.
TXT
وصف:
Torsion Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.265 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Parallel, right end first end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Parallel, right end second end
MRC:
The length of a straight line which passes through the center of the stock,and terminates at the circumference.ACVU
Stock Diameter:
Between 0.020 inches and 0.050 inches
Spring Free Length:
0.265 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
5
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Left-hand
Spring Free Outside Diameter:
Between 0.280 inches and 0.320 inches
MRC:
An indication of the angular relationship of the ends of the item.AXMH
End Angular Relationship:
Ends angled one to other
End Length:
1.100 inches both ends
End Length From Coil Axis To First Bend:
0.780 inches both ends
End Length From First Bend To Second Bend Or End:
0.200 inches both ends
End Length From Second Bend To Third Bend Or End:
0.160 inches both ends
End Length From Third Bend Or End:
0.250 inches both ends
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Both spring ends have a end length of 0.160 inches from a fourth bend to end; all bends of ends are parallel to outside diameter of spring
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 631
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5673, 17-7ph, cond c assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Single torsion left hand
