رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
2 internal keys are straight and 180 degrees apart, 0.102 in. Wide, 0.237 in. From centerline to top of internal keys, washer bent to an height of 0.053 in. Min 0.079 in. Max
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.660 inches and 0.680 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 0.846 inches and 0.866 inches
External Straight Key Width:
Between 0.090 inches and 0.110 inches
Overall Distance Including Keys:
Between 1.100 inches and 1.120 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.025 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 32.0 rockwell c and 36.0 rockwell c
Angle Between First And Second Key:
79.0 degrees
Angle Between Second And Third Key:
64.0 degrees
Angle Between Third And Fourth Key:
99.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches all surfaces
MRC:
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.HEAT
Heat Treatment:
Quenched and tempered
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 6350 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
+16-te5, class 1, 99207 mfr ref single treatment response
