رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.410 inches and 0.420 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 0.540 inches and 0.550 inches
External Straight Key Width:
Between 0.107 inches and 0.112 inches
MRC:
The measurement from one flat surface of the key to the opposite flat surface.ABLJ
Internal Straight Key Width:
Between 0.080 inches and 0.090 inches
Distance From Centerline To Top Of Internal Key:
Between 0.100 inches and 0.105 inches
Overall Distance Including Keys:
Between 0.700 inches and 0.720 inches
MRC:
The number of internal keys included.ABMR
Internal Key Quantity:
2
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.025 inches and 0.035 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 32.0 rockwell c and 36.0 rockwell c
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches all surfaces
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams6350 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Key
