رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Externally Relieved Body Bolt
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.445 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
Between 1.890 inches and 1.910 inches
First Diameter From Head:
Between 0.335 inches and 0.336 inches
Second Diameter From Head:
Between 0.247 inches and 0.251 inches
Third Diameter From Head:
Between 0.318 inches and 0.322 inches
Fourth Diameter From Head:
Between 0.247 inches and 0.251 inches
Distance From Largest Bearing Surface Of Head To End Of First Diameter:
Between 0.515 inches and 0.525 inches
Distance From Largest Bearing Surface Of Head To End Of Second Diameter:
Between 1.050 inches and 1.070 inches
Distance From Largest Bearing Surface Of Head To End Of Third Diameter:
Between 1.135 inches and 1.155 inches
Distance From Largest Bearing Surface Of Head To End Of Fourth Diameter:
Between 1.445 inches and 1.465 inches
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.312 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
24
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Pwa92 fscm 77445 mfr ref single material response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unjf
