رقم الجزء 405391

Headless Grooved Pin

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 27.8 and 37.53 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
405391
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
50 EA
NIIN:
007414438

معلومات الجزء
0.125 in. Diameter center drilled both ends

NSN
رقم المخزون الوطني:
5315-00-741-4438 5315007414438
TXT
وصف:
Headless Grooved Pin
INC
INC
رمز اسم العنصر:
02386
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.428 inches and 2.448 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.3040 inches and 0.3050 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
2.314 inches
MRC:
None.ABPA
Undercut Diameter:
Between 0.281 inches and 0.285 inches
MRC:
None.ABPC
Undercut Width:
Between 0.028 inches and 0.036 inches
MRC:
None.ABPD
Second Undercut Width:
Between 0.028 inches and 0.036 inches
MRC:
None.AMCS
First End Taper Length:
Between 0.006 inches and 0.026 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Identical
MRC:
Indicates the location of the first end.CRDY
First End Location:
Both ends
MRC:
None.CRMG
First End Taper Angle:
Between 44.5 degrees and 45.5 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
12.0 microinches shank end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-689 federal specification single material response or an-qq-s-690 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Zinc
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove

{lang[cimilar]} Headless Grooved Pins

« Nails, Machine Keys and Pins {lang[catalog]}
قارن الآن»
واضح | أخفى