رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Head hole 0.300-0.320 in. Diameter x 0.242 in. Deep; surface finish on shank areas, threads, and bearing surface of head is 32 microinches
TXT
وصف:
Externally Relieved Body Bolt
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.575 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
Between 1.735 inches and 1.755 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Double hexagon w/hole
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.444 inches and 0.464 inches
Width Between Flats:
0.500 inches
Extended Washer Diameter:
Between 0.678 inches and 0.698 inches
Extended Washer Thickness:
0.120 inches
First Diameter From Head:
Between 0.356 inches and 0.360 inches
Second Diameter From Head:
Between 0.4645 inches and 0.4650 inches
Third Diameter From Head:
Between 0.356 inches and 0.360 inches
Distance From Largest Bearing Surface Of Head To End Of First Diameter:
Between 0.255 inches and 0.265 inches
Distance From Largest Bearing Surface Of Head To End Of Second Diameter:
Between 0.655 inches and 0.665 inches
Distance From Largest Bearing Surface Of Head To End Of Third Diameter:
Between 1.160 inches and 1.180 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F100pw0229 engine/core mod
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.4375 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
20
MRC:
The number of externally relieved diameters on the body,adjacent to the head.CSNG
Externally Relieved Body Diameter Quantity:
2
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Cobalt alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 7475 assn standard single material response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unjf
