رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Basic rectangular head 0.390 in. Min and 0.400 in. Maximum one end has a radius of 23 degrees min and 27 degrees maximum 0.140 in. Min and 0.150 in. Maximum in length
TXT
وصف:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Round w/wrench flats chamfered
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.187 inches and 0.189 inches
Undercut Diameter:
Between 0.169 inches and 0.177 inches
Under Head Length:
Between 5.770 inches and 5.790 inches
Undercut Width:
Between 0.010 inches and 0.020 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F100pw0229 engine/aug mod
First End Taper Length:
Between 0.105 inches and 0.115 inches
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
Between 0.204 inches and 0.220 inches
First End Taper Angle:
Between 28.0 degrees and 32.0 degrees
Pin Head Diameter:
Between 0.530 inches and 0.550 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches shank end
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.075 inches and 0.085 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy 718
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5663 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
