رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
Indicates the type of bearings furnished.ACSK
Bearing Type:
Plain
MRC:
The maximum load for which the item is rated.AGCS
Maximum Load Rating:
6000.0 pounds
MRC:
Indicates the type of block.AMCL
Block Type:
Snatch
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.AMCN
Locking Style:
Safety w/latch pin
MRC:
The number of sheaves provided.AMCQ
Sheave Quantity:
1
MRC:
Indicates the type of tackle the item will accommodate.AMCT
Tackle Accommodated Type:
Wire rope
MRC:
An indication of whether or not an antitoppling device is included.AMDC
Antitoppling Device:
Not included
MRC:
A measurement of the longest dimension of the shell,in distinction from width.AMRQ
Shell Length:
13.000 inches
MRC:
The length of a straight line which passes through the center of the sheave,and terminates at the outside circumference.AMRR
Sheave Outside Diameter:
8.000 inches
Center Pin Diameter:
0.875 inches
MRC:
The means by which the sheave bearing is lubricated.AMWZ
Sheave Bearing Lubrication Method:
Self-lubricated
MRC:
The maximum length of a straight line which passes through the center of the accommodation for a tackle,and terminates at the circumference.AMXC
Maximum Tackle Diameter Accommodated:
0.625 inches
MRC:
An indication of whether or not a tackle locking device is included.AMXD
Tackle Locking Device:
Not included
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the attachment.AMXF
Attachment Style:
Drilled swivel eye and shackle
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Manganese bronze bearing err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, corrosion resisting center pin err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, corrosion resisting sheave err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, corrosion resisting, aisi 304 shell err-100 err-100
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round pattern
