رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Single agent hose reel
TXT
وصف:
Hose Reel Assembly
MRC:
Indicates the type of connection between the prime mover and the shaft.AAYX
Drive Connection Type:
Gear
MRC:
The maximum rated capacity delivered by the item.AHYV
Maximum Discharge Flow Rate:
125.0 gallons per minute
MRC:
An indication of whether or not a provision to prevent sparking is included.AJMB
Nonsparking Provision:
Not included
MRC:
An indication of whether or not a controller is included.ASRG
Controller:
Not included
MRC:
The measured pressure capacity for which the item is rated.AXAW
Pressure Capacity:
175.0 pounds per square inch
MRC:
An indication of whether or not a clutch is included.AXJL
Clutch:
Not included
MRC:
Indicates the location for which the item is designed to be installed.AYNY
Installation Location:
Right hand
MRC:
The facility for mounting the item.AZGM
Mounting Facility:
Floor
MRC:
A measurement of the longest dimension of the hose the item will accommodate,in distinction from width.BMWQ
Hose Length Accommodated:
Between 125.000 feet and 150.000 feet
MRC:
The length of a straight line which passes through the center of the accommodation for the hose,and terminates at the circumference.BMWR
Hose Diameter Accommodated:
1.500 inches
MRC:
The length of a straight line which passes through the center of the reel rim,and terminates at the outside circumference.BMWS
Reel Rim Outside Diameter:
Between 28.875 inches and 29.125 inches
MRC:
A measurement taken at right angles to the length of the reel hub,in distinction from thickness.BMWT
Reel Hub Width:
Between 19.375 inches and 19.625 inches
MRC:
An indication of whether or not a motor switch is included.BMWY
Motor Switch:
Not included
MRC:
A measurement from the bottom to the top of the hub center line above the base,in distinction from depth.BMXB
Hub Center Line Height Above Base:
Between 16.875 inches and 17.125 inches
MRC:
The means by which the reel is actuated.BRTW
Reel Actuation Method:
Manual
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Corrosion resistant steel fasteners included; reel shall be treated, primed, and painted iaw mil-t-704j; finish enamel shall be red; type ii reel
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Fuel/oil, hydrocarbon
