رقم الجزء 40A166806-03

Access Cover

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 560 and 756 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
40a166806-03
تجريد:
Yes - DEMIL/MLI
صلاحيه:
N/A
وحدة القياس:
No qup EA
NIIN:
016145455

معلومات الجزء
There is a fifth hole whose center is located 0.428 from edge along the width and 0.865 from edge along the length. T is 0.125 diameter, counter sunk 0.235 x 100 degrees on the far side. There is also a retangular channel 0.070 min/0.075 maximum by 0.045 min/0.050 maximum deep on the far side. From the insideof the channel, it is located 0.108 from the edge along the width and 0.591 from the edge along the length. It's dimentions are 1.891 long along the width by 1.798 wide along the length.

NSN
رقم المخزون الوطني:
5340-01-614-5455 5340016145455
TXT
وصف:
Access Cover
INC
INC
رمز اسم العنصر:
29785
INC
COM
امتثال:
* ITAR Controlled
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
1.625 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
2.980 inches
MRC:
None.ADNY
Distance Between Holes Along Length:
2.50 inches
MRC:
None.ADNZ
Distance Between Holes Along Width:
1.625 inches
MRC:
None.ADPC
Distance From First Hole Centerline To End Along Length:
0.240 inches
MRC:
None.ADPD
Distance From First Hole Centerline To End Along Width:
0.241 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.090 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
E-3 4045 serd
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061

{lang[cimilar]} Access Covers

« Commercial Hardware {lang[catalog]}
قارن الآن»
واضح | أخفى