رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
9.375 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
9.375 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.875 inches
Hole Quantity Along Length:
6
Hole Quantity Along Width:
6
Distance Between Holes Along Length:
3.000 inches
Distance Between Holes Along Width:
3.000 inches
Distance Between Hole Centerline And First Hole Along Length:
1.062 inches
Distance Between Hole Centerline And First Hole Along Width:
1.062 inches
Distance From First Hole Centerline To End Along Length:
1.688 inches
Distance From First Hole Centerline To End Along Width:
1.688 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.188 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
5895-00-885-2273, landing control central, an/mpn-14
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061 or aluminum alloy 5052
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250 federal specification all material responses
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize and primer and paint
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type 1, class 1 military specification 1st treatment response and mil-p-8585 federal specification 2nd treatment response and tt-e-529, class b, color 27038 federal specification 3rd treatment response
