رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
4
MRC:
Indicates the type of terminals for providing electrical connection to the item.AARB
Terminal Type:
Lug
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
8.750 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
12.620 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
16.060 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
12.080 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
9.000 inches
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
Four 0.530 in. Diameter holes on each leg7.500apart on the saft end and 4.500 on each side.
MRC:
The distance between the mounting facilities.ARKQ
Mounting Facility Spacing:
9.000in on the shaft end and 7.500 on the side
MRC:
The number of main poles included.AWTS
Main Pole Quantity:
2
MRC:
The number of commutating poles included.AWTT
Commutating Pole Quantity:
2
MRC:
An indication of whether or not a housing in accordance with national electrical manufacturers association standard is provided.AZGP
Housing In Accordance With Nema Standard:
Provided
MRC:
The design designation indicating the configuration that most nearly corresponds to the appearance of the frame,assigned by the national electrical manufacturers association.AZGQ
Err Default:
Err default
MRC:
The identifying number assigned to the frame by the national electrical manufacturers association.AZGR
Nema Frame Identifying Number:
182thz
MRC:
An indication of whether or not a housing is provided.AZLC
Housing:
Provided
MRC:
An indication of whether or not an end bracket mounting is provided.AZLD
End Bracket Mounting:
Provided
MRC:
The mounting facility/ies/ for which the end item is designed.AZLE
End Item Mounting Facility For Which Designed:
Motor
MRC:
The narrative expression used for indicating the configuration of the end item mounting facilities.AZMK
End Item Mounting Configuration:
Four holes thur each leg.
MRC:
The spacing between the end item mounting facilities.AZML
End Item Mounting Facility Spacing:
On the shaft end 7.500apart and on the side 4.500in
