رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Second end slotted 0.125 in. Wide 0.190 in. Min 0.330 in. Maximum deep
TXT
وصف:
Single Leg Wire Rope Assembly
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
24 terminal attachment first end
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand terminal attachment first end
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
1.190 inches terminal attachment first end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 6.727 feet and 6.737 feet
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.188 inches rope
MRC:
The means in which filaments are laid into strands or strands into rope or like items.AJXH
Lay Method:
Right regular all layers
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the attachment.AMXF
Attachment Style:
Stud terminal terminal attachment first end
MRC:
Indicates the type of end.APTD
End Type:
Terminal attachment both ends
MRC:
The measured load required to break the item in tension.BZQQ
Breaking Strength:
4200.000 pounds
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
24 terminal attachment first end
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.375 inches terminal attachment first end
MRC:
The prefabrication form of the item.CTXY
Prefabrication Form:
Preformed
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 302 or steel comp 304
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763 federal specification all material responses
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
7 x 19
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf terminal attachment first end
