رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Has 28 mounting holes, 0.164-32 unc drill oversize, diameter 0.147 inches thru, the mounting holes are countersunk, top diameter is 0.344 inches, bottom diameter is 0.194 inches.; cover, access, aircraft has multiple round recesses to fit gasket and pads, thickness of cover access is 0.337 inches.
TXT
وصف:
Aircraft Access Cover
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Circular recess
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
14.719 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
22.422 inches
Hole Quantity Along Length:
8
Hole Quantity Along Width:
5
Distance Between Holes Along Length:
2.500 inches
Distance Between Holes Along Width:
2.500 inches
Distance Between Hole Centerline And First Hole Along Length:
2.562 inches
Distance Between Hole Centerline And First Hole Along Width:
2.040 inches
Distance From First Hole Centerline To End Along Length:
2.874 inches
Distance From First Hole Centerline To End Along Width:
2.359 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Threaded hole
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Cover, assy, top, fwd
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Agav
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Primer epoxy-polyamide and paint
