رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Matl-cres steel ams 5643, comp 17-4ph; passivated, hrps-161 hydraulic research; right end c/bored 0.307/0.308 in. Diameter by 0.180/0.185 in. Deep, right end slotted 4 places equally spaced 0.093 in. W by 0.080 in. Deep, 4 holes 0.109 in. Diameter equally spaced drilled through seat 0.306 in. From right end
TXT
وصف:
Helical Compression Spring Seat
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.4380 inches and 0.4400 inches
First Step Diameter:
Between 0.4335 inches and 0.4355 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.2350 inches and 0.2450 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Solid
MRC:
The length of a straight line which passes through the center of the end of the item,and terminates at the circumference.BBRB
End Diameter:
Between 0.3650 inches and 0.3750 inches
Distance From End To First Step:
Between 0.3550 inches and 0.3650 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, corrosion resisting
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Passivated
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-i-6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
