رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
Indicates the design type of the item.APGF
Design Type:
Spur first gear
MRC:
Indicates the design type of the item.APGF
Design Type:
Spur second gear
MRC:
The structural characteristic of the item.CQCF
Construction:
Assembled
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
26.0 rockwell c and 33.0 rockwell c
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
26.0 rockwell c and 33.0 rockwell c
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
0.8542 inches first gear
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
0.266 inches second gear
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
0.753 inches
MRC:
A nominal measurement of the longest dimension of the hub,in distinction from width.CWQN
Hub Length:
0.083 inches between first and second gear
MRC:
A nominal measurement of the longest dimension of the hub,in distinction from width.CWQN
Hub Length:
0.1600 inches between second and third gear
MRC:
A nominal measurement of the longest dimension of the hub,in distinction from width.CWQN
Hub Length:
0.1900 inches second end
MRC:
A nominal measurement of the longest dimension of the hub,in distinction from width.CWQN
Hub Length:
0.2050 inches first end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.CWTR
Hub Style Designator:
2 steps both ends
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-6758, comp 4130, cond 4 military specification single material response