رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 5.500 inches and 5.780 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.915 inches and 1.045 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.400 inches and 1.500 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.334 inches and 0.354 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
3
Distance From Center Of Mounting Hole To Edge Along The Width:
Between 0.480 inches and 0.520 inches
Center To Center Distance Between First And Second Mounting Holes:
1.500 inches
Center To Center Distance Between First And Third Mounting Holes:
3.000 inches
MRC:
The facility for mounting the item.AZGM
Mounting Facility:
Unthreaded hole
MRC:
A measurement from the bottom to the top of a block,in distinction from depth.BYGG
Block Height:
Between 0.670 inches and 0.770 inches
MRC:
The number of clamping holes provided.CWTD
Clamping Hole Quantity:
4
Distance From End To First Mounting Hole Center:
Between 1.280 inches and 1.380 inches
Distance From End To First Clamping Hole Center:
Between 0.580 inches and 0.630 inches
Center To Center Distance Between First And Sixth Clamping Holes:
4.500 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/2 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, ty2, cl1 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
