رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
63.0 microin finish id of internal flanges, 250.0 microin finish id of body, 125.0 microin finish all other surfaces
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.5000 inches first
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
18.0000 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
9.1200 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 8.3800 inches and 8.4000 inches
Left Internal Flange Hole Diameter:
Between 8.2630 inches and 8.2660 inches
Right Internal Flange Hole Diameter:
Between 8.2630 inches and 8.2660 inches
Left Internal Flange Width:
4.5000 inches
Right Internal Flange Width:
4.5000 inches
Left Flange Outside Diameter:
Between 9.2520 inches and 9.2540 inches
Right Flange Outside Diameter:
Between 9.2520 inches and 9.2540 inches
Left Flange Width:
4.5000 inches
Right Flange Width:
4.5000 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered outside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square left flange body corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square left flange outside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square right flange body corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square right flange outside left corner
MRC:
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.CTJM
Antirotation/lubrication Type And Quantity:
8 hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 903
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-b-390 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
18c-2 solid, external flanges both ends, interior flang (s) not located at either end
