رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Extension Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.300 inches
MRC:
A measurement taken at right angles to the length of an opening,in distinction from thickness.ABPP
Opening Width:
0.210 inches second end
MRC:
A measurement taken at right angles to the length of an opening,in distinction from thickness.ABPP
Opening Width:
0.278 inches first end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Offset hook, right angle second end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Offset hook, side first end
MRC:
The length of a straight line which passes through the center of the stock,and terminates at the circumference.ACVU
Stock Diameter:
0.0475 inches
Spring Free Length:
2.185 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
19-1/4
MRC:
Indicates the design type of the item.APGF
Design Type:
Closed
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
15.39 pounds
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand or left-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
9.150 pounds per inch
Spring Free Outside Diameter:
0.395 inches
Hook Radius:
0.190 inches both ends
Coil To Hook Inside Length:
0.520 inches second end
Coil To Hook Inside Length:
0.588 inches first end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel uns k08500
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-w-470 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical
