رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Two hex drive 1/4 in.-28 nf set screws at 120 deg
TXT
وصف:
Roller Bearing Unit
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
3.6250 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.0540 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.4380 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.6250 inches
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
4.5000 inches
MRC:
The length of a straight line which passes through the center of the housing, and terminates at the circumference.AFWB
Housing Diameter:
2.6410 inches
MRC:
A measurement of the longest dimension of the housing,in distinction from width.AFWD
Housing Length:
1.0460 inches
MRC:
The number of grooves in which the rolling element rides.AGYX
Rolling Element Groove Quantity:
1
MRC:
Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.AGZA
Alignment Type:
Rigid
MRC:
The designation specifying the type of fit as recognized by industrial and governmental agencies.AGZH
Internal Fit-up Designation:
Standard
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the assembly.AHZC
Assemblylength:
Between 1.3460 inches and 1.3510 inches
MRC:
Indicates the type of seal included with the item.AKRF
Seal Type:
Contact
MRC:
Indicates the type of block.AMCL
Block Type:
Fixed
MRC:
Indicates the type of shaft end provided.ANJS
Shaft End Type:
Open
MRC:
Indicates the location of the seal.ANKF
Seal Location:
Both ends
MRC:
Indicates the type of load capability.ANKK
Load Capability Type:
Radial
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Ground rolling element groove
MRC:
The means of locking the rotating element of the bearing to the shaft.CWGY
Rotating Element Locking Method:
Straight sleeve
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Flange block
