رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
U/o brake system
TXT
وصف:
Metal Tube Assembly
MRC:
A measurement of the smallest dimension of the wall,in distinction from length or width.AAGT
Wall Thickness:
0.028 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a first end
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a second end
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand first end
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand second end
MRC:
The number of mating ends provided with the item which are designed to accommodate another connector.AFQW
Mating End Quantity:
1 first end
MRC:
The number of mating ends provided with the item which are designed to accommodate another connector.AFQW
Mating End Quantity:
1 second end
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Light armored vehicle
MRC:
The element,compound,or mixture of which the tubing is fabricated,excluding any surface treatment.AHSA
Tubing Material:
Steel, aisi 304
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end connection.AJFX
End Connection Style:
Inverted flare first end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end connection.AJFX
End Connection Style:
Inverted flare second end
MRC:
The angle of the end surface upon which the mated surface seats,expressed in degrees.AJFY
Seat Angle In Deg:
45.0 first end
MRC:
The angle of the end surface upon which the mated surface seats,expressed in degrees.AJFY
Seat Angle In Deg:
45.0 second end
MRC:
The physical configuration of the item.ARJD
Design Form:
Prebent
MRC:
The length of a straight line which passes through the center of the tube,and terminates at the outside circumference.BBYQ
Tube Outside Diameter:
0.250 inches
MRC:
The specification and/or standard of the end connection.BZRS
End Connection Specification/std:
Sae j512, part no. 4-4 040110
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
20 first end
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
24 second end
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.438 inches second end
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.500 inches first end
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, corrosion resisting second end
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, corrosion resisting first end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel first end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel second end
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Un first end
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Uns second end
