رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Eadhesive backing on side opposite skin; adhesive shall not delaminate from foam when removing release backing; specgfour strips are required; p/n 475456 must be used with this item to form a gasket
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Cellular, unexploded
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
Not rated
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
30000 pounds per square inch
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
0.375 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.375 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
2.750 inches
MRC:
The ability of the material to transmit light and allow visual perception.ABWN
Material Transparency:
Opaque
MRC:
The backing or coating that is applied to the surface for protection of the basic material. it is intended to be stripped off prior to application of the fabricated item,and is not intended to become part of the sealing surface. excludes surface treatments,adhesive coatings,and lubricants.ADYX
Protective Covering Material:
Plastic
MRC:
The maximum load which can be applied normally to the plane of the material,per unit of cross-sectional area,that an item can withstand without fracture.ADZB
Flexural Strength:
3500 pounds per square inch
MRC:
A measurement of volume taken by multiplying the length by the width by the height of an item and rendered in cubic units.AFJK
Cubic Measure:
0.001 cubic feet
MRC:
An indication of the rated density of the item.BDNZ
Density Rating:
4.5 pounds per cubic foot
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Black
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, vinyl chloride
MRC:
The professional group,industrial association,or manufacturer,s specification or standard which establishes the item of supply being described. includes the federal supply code for manufacturer /fscm/ of the entity controlling the document. (this information was formerly provided in part by responses to sr-1 for other than government controlled documents.)ZZZS
Nongovernment Document Data:
19139-475455
