رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Engine Accessory Generator
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
Between 0.496 inches and 0.498 inches
MRC:
Items furnished as accessories which are not specified elsewhere.ABFF
Furnished Items:
Cooling blast tube and radio interference shielding
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
11
MRC:
The direction of the mounting hole thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACJC
Mounting Hole Thread Direction:
Right-hand
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Corrosion resistant and fungus resistant
MRC:
An indication of whether or not an item is capable of operation while submerged.AHZV
Submersibility:
Nonsubmersible
MRC:
The maximum altitude at which the item is rated to function.AKAE
Maximum Operating Altitude Rating:
10000.0 feet
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end.AKCT
Shaft Rotation Direction:
Clockwise
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
1.050 inches
MRC:
The minimum speed the armature can revolve and maintain full current output,expressed in revolutions per minute.BCGD
Armature Minimum Speed In Rpm At Full Current Output:
6500
MRC:
The maximum amount of output current for which the item is rated,expressed in amperes.BCGF
Maximum Output Current Rating In Amps:
12.0
MRC:
The cut-in speed necessary to maintain a minimum current flow,expressed in revolutions per minute.BCGG
Minimum Current Cut-in Speed In Rpm:
6000
MRC:
The means by which the item is grounded.BCGN
Grounding Method:
Internal
MRC:
The speed the armature can revolve and produce maximum current,expressed in revolutions per minute.BCND
Maximum Rated Armature Speed In Rpm:
7500
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for the specific diameter of a threaded mounting hole.CMLK
Mounting Hole Thread Series Designator:
Unc
MRC:
The length of a straight line which passes through the center of a threaded mounting hole,and terminates at the circumference.CMLL
Mounting Hole Thread Diameter:
0.190 inches
MRC:
The number of mounting hole threads per linear inch measured on a line parallel to the thread axis.CMLM
Mounting Hole Thready Qty Per Inch (tpi):
24
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal mounting hole thread.CMLN
Mounting Hole Thread Class:
3b
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
28.0
