رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Two additional cross drilled through holes on second end, 0.125/0.129 in. Diameter of one hole, 0.370/0.375 in. Diameter of other hole, 0.370 in. Distance from both hole centers to end, 90 degrees angle btwn holes
TXT
وصف:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Unthreaded cross drilled
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Indented flat keyway and cross drilled hole
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
10.370 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.9850 inches and 0.9900 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
0.3750 inches
First End Distance From Hole Center To End:
4.688 inches
MRC:
A measurement taken at right angles to the length of the keyway at the second end,in distinction from thickness.AMFR
Second End Keyway Width:
Between 0.1350 inches and 0.1500 inches
Second End External Keyway Length:
Between 2.125 inches and 2.156 inches
MRC:
A measurement between specified points of the keyway at the second end.AMFT
Second End Keyway Depth:
Between 0.100 inches and 0.120 inches
Second End Distance From Keyway Center To End:
3.500 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.7400 inches and 0.7500 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
0.3750 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
2
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 0.985 inches and 0.990 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 302
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763, cond a federal specification single material response
