رقم الجزء 484060-1

Flexible Shaft Coupling

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 425.28 and 574.128 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
484060-1
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
007232909
NSN
رقم المخزون الوطني:
3010-00-723-2909 3010007232909
TXT
وصف:
Flexible Shaft Coupling
INC
INC
رمز اسم العنصر:
04459
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.2810 inches both ends
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.3430 inches both ends
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.400 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.312 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
12 first end
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABVK
Thread Size Designator:
No.4/0.112 in./-40 both ends
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.1300 inches both ends
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
0.2180 inches both ends
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Splined first end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight second end
MRC:
Indicates the design type of the item.APGF
Design Type:
Internal gear
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.250 inches first end
MRC:
The means by which the item is secured.BSNP
Securing Method:
Threaded hole both ends
MRC:
The number of threaded holes provided.BSNQ
Threaded Hole Quantity:
2 both ends
MRC:
Indicates the location of a threaded hole on the item.BSNR
Threaded Hole Location:
Both ends: located 90 degrees apart
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Standard grid spring

{lang[cimilar]} Flexible Shaft Couplings

« Torque Converters and Speed Changers {lang[catalog]}
قارن الآن»
واضح | أخفى