رقم الجزء 4E20945

Headless Shoulder Pin

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards
رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
4e20945
تجريد:
No
صلاحيه:
وحدة القياس:
NIIN:
000748853

معلومات الجزء
3/8-24 in. Nf tap hole 1-3/8 in. Deep on stepped end 1/4 in. Diameter hole drilled through slot end to meet drilled hole through horizontal plane, keyway slot 3/8 in. W by 2-1/2 in. Long by 1/4 in. Deep located on first step at a 56 degrees angle w/slot end on a horivontal plane

NSN
رقم المخزون الوطني:
5315-00-074-8853 5315000748853
TXT
وصف:
Headless Shoulder Pin
INC
INC
رمز اسم العنصر:
16749
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Radius
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
10.500 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Drilled through center
MRC:
None.ABRC
First Hole Diameter:
0.250 inches
MRC:
None.ABRE
Distance From Centerline Of Hole To End Of Pin:
4.500 inches
MRC:
The measured distance from a fixed point to a variable point on a curve or curved surface.ALWS
Second End Corner Radius:
0.062 inches
MRC:
None.AMCS
First End Taper Length:
0.062 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
Indicates the location of the first end.CRDY
First End Location:
Shank end
MRC:
None.CRMG
First End Taper Angle:
45.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4140
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66 federal standard single material response

{lang[cimilar]} Headless Shoulder Pins

« Nails, Machine Keys and Pins {lang[catalog]}
قارن الآن»
واضح | أخفى