رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Two 0.160 in. Diameter by 0.090 in. Deep holes, 8.330 in. And 9.500 in. From first end
TXT
وصف:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Circular grooved and externally threaded
First End Groove Width:
0.1500 inches
First End Groove Diameter:
Between 0.2310 inches and 0.2410 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved flat keyway and externally threaded
Second End Groove Width:
0.1500 inches
Second End Groove Diameter:
Between 0.4170 inches and 0.4270 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
21.520 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
NHA1-68-000-0801
First End Distance From End To Groove:
0.850 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
0.3125 inches
First End External Thread Length:
0.850 inches
Second End Distance From End To Groove:
1.100 inches
Second End External Keyway Length:
1.750 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.5000 inches
Second End External Thread Length:
1.100 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
5
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
0.500 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 17-4ph
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams-5643 assn standard single material response
