رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Threaded Straight Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Slotted
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
Between 0.990 inches and 1.010 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Drilled shank threaded pin
First Hole Diameter:
Between 0.128 inches and 0.138 inches
Distance From Centerline Of Hole To End Of Pin:
Between 0.410 inches and 0.470 inches
MRC:
The overall dimension measured along the longitudinal axis,with terminated points at the extreme ends of the pin.ACHT
Pinlength:
Between 8.660 inches and 8.720 inches
MRC:
The overall length of a straight line which passes through the center of the pin,and terminates at the outside circumference.ACHU
Pindiameter:
Between 0.2470 inches and 0.2490 inches
Second End Slot Width:
Between 0.030 inches and 0.060 inches
First End Taper Length:
Between 0.020 inches and 0.080 inches
First End Slot Depth:
Between 0.160 inches and 0.220 inches
Second End Slot Depth:
Between 0.160 inches and 0.220 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.250 inches
MRC:
Indicates the location of the first end.CRDY
First End Location:
Threaded end
First End Taper Angle:
Between 44.5 degrees and 45.5 degrees
MRC:
The distance measured on a line parallel to the longitudinal axis which determines the gripping length of the pin.CRSW
Pin Grip Length:
7.183 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc
