رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Bolt holes on face side counterbored to 1.531 in. By 0.031 in. Deep
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
7.500 inches
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK
Flange Diameter:
9.000 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.938 inches
MRC:
The industrial designation or term used to define the nominal diameter of pipe for which the item is designed.ACSU
Pipe Size For Which Designed:
4.000 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
8
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
0.750 inches
MRC:
A measurement from the bottom to the top surface of a raised face,in distinction from depth.AJED
Raised Face Height:
0.060 inches
MRC:
The length of a straight line which passes through the center of a raised face,and terminates at the circumference.AJEE
Raised Face Diameter:
Between 5.312 inches and 6.188 inches
Neck Height:
0.370 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange section.AJEM
Flange Section Style:
Raised face, raised neck
MRC:
The condition of the face seating surface of an item which contacts another surface.AKWE
Face Seating Surface Condition:
Serrated
MRC:
The maximum pressure at which an item is rated to operate for each type of service with which an item may be used.CQCJ
Maximum Operating Pressure And Media For Which Designed:
150.0 pounds per square inch air and 150.0 pounds per square inch steam
MRC:
A rating which expresses the degree of heat or cold as applied to the operation,or limitation of operation,for each type of service with which an item may be used.CRWH
Maximum Operating Tempurature And Media For Which Designed:
500.0 degrees fahrenheit steam
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Primer
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round, one bolt hole circle
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
80204-b16.5 professional/industrial association standard and 81349-mil-f-18180 government specification
