رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Item has 6 additional holes that are cbored 0.422 in. Dia, there is a total of 36 holes that require screws p/n 965858-1c; item also has 2 instruction warning labels, 1 w/ith p/n 3282256-1 & 1 labeled "center gravity" with p/n 3282256-7, there is also a "caution" label p/n 3457150, all labels are applied per hp 15-17 type 1
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
13.100 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
20.900 inches
Hole Quantity Along Length:
16
Hole Quantity Along Width:
14
Distance Between Holes Along Length:
2.337 inches and 2.340 inches
Distance Between Holes Along Width:
1.567 inches and 1.916 inches and 1.917 inches
Distance From First Hole Centerline To End Along Length:
2.263 inches
Distance From First Hole Centerline To End Along Width:
0.975 inches
MRC:
The length of a linear break at an angle to the surfaces forming the edge.ADPE
Corner Bevel Length:
0.120 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
Between 0.195 inches and 0.205 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F-15
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Special marking
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 tem t651 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate and primer and paint epoxy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-5541, cl1a military specification 1st treatment response and mil-p-23377 type 1 military specification 2nd treatment response and mil-c-22751 type 1 military specification 3rd treatment response
