رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.249 inches and 0.251 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
0.247 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.500 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.312 inches
MRC:
A measurement of a straight line extending from the center of a circle to the end.ABPZ
End Radius:
0.250 inches
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
25.0 rockwell c and 32.0 rockwell c
MRC:
The distance laterally from tip to tip of the fork.AJSD
Fork Span Width:
0.140 inches
MRC:
The length of a straight line which passes through the center of a securing pin hole,and terminates at the circumference.AKYE
Securing Pin Hole Diameter:
Between 0.094 inches and 0.096 inches
MRC:
The distance along a straight line from the rod connecting end at right angle to the geometric axis of the securing pin hole center.AKYH
Distance From Center Of Securing Pin Hole To Rod End:
0.121 inches
Distance From Pivot Pinhole Center To Rod Connection End:
1.844 inches
Fork Arm Thickness:
0.085 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
0.500 inches
MRC:
The length of a straight line which passes through the center of the shank shoulder,and terminates at the circumference.AKYY
Shank Shoulder Diameter:
0.227 inches
MRC:
A measurement of the longest dimension of a shank shoulder,in distinction from width.AKYZ
Shank Shoulder Length:
1.100 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 416
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Clevis
