رقم الجزء 5128359-1

Gasket

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 30.66 and 41.391 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
5128359-1
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
015426675

معلومات الجزء
The distance between 1st and 2nd of larger holes from either end along length is 3.500 in (nom); distance between 2nd and 3rd of larger holes from either end along length is 3.250 in (nom); the distance between larger and smaller holes is 0.300 in (nom); there are 14 0.188 in diameter holes and 28 0.125 in diameter holes; diameter of alum internally molded-in reinforcement wire is 0.0045 in

NSN
رقم المخزون الوطني:
5330-01-542-6675 5330015426675
TXT
وصف:
Gasket
INC
INC
رمز اسم العنصر:
04522
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Metal and synthetic rubber
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
15.410 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
5.420 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
4.520 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
14.510 inches
MRC:
None.ADVD
Outside Edge To Bolt Hole Center Distance Along Width:
0.225 inches
MRC:
None.ADVE
Outside Edge To Bolt Hole Center Distance Along Length:
0.225 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.062 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
42
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
712 7000 3-002 cams (v2)
MRC:
None.CTRH
Outside Edge To Inside Edge Smallest Distance Along Width:
0.450 inches
MRC:
None.CTSC
Outside Edge To Inside Edge Smallest Distance Along Length:
0.450 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum internally molded-in reinforcement
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Silicone
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular

{lang[cimilar]} Gaskets

« Packing and Gasket Materials {lang[catalog]}
قارن الآن»
واضح | أخفى