رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Cbore both ends, 1st end diameter 1.145 in.By 0.125 in.Dp, 2nd end 0.938 in.Dia by 0.125 in.Dp
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain, solid
MRC:
The number of serrations on the item.ADDW
Serration Quantity:
48 both ends
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Truck, forklift, diesel engine driven, 6000 lb.; anthony model mlt 6-2, nsn 3930003271575
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
3.0005 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
39
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Serrated both ends
MRC:
A measurement indicating the diameter-pitch per measurement scale of the serration.BDYK
Serration Pitch Diameter:
0.7340 inches both ends
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
40.0 rockwell c teeth and 50.0 rockwell c teeth
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
3.154 inches
MRC:
Indicates the type of teeth included on the item.CWMW
Teeth Type:
Single helix
MRC:
An indication as to whether the teeth are a standard depth or modified to a shorter depth.CWNH
Tooth Form:
Standard
MRC:
The direction the teeth curve when viewed from the edge of the item.CWNM
Tooth Direction:
Right
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
20.0000 degrees
MRC:
The measurement of the helix angle on the item.CWPZ
Helix Angle:
22.5104 degrees
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
0.760 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1141
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66 federal standard single material response and aisi/saf 1141 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Hubless
