رقم الجزء 513902-2

Flexible Shaft Coupling

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 180.32 and 243.432 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
513902-2
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
002527635
NSN
رقم المخزون الوطني:
3010-00-252-7635 3010002527635
TXT
وصف:
Flexible Shaft Coupling
INC
INC
رمز اسم العنصر:
04459
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.082 inches both ends
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.2300 inches first end
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.2320 inches second end
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.2530 inches first end
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.2610 inches second end
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
0.2700 inches both ends
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.2475 inches both ends
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.437 inches and 1.452 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.843 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.ABQA
Taper Minor Diameter:
0.3750 inches both ends
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
19 both ends
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABVK
Thread Size Designator:
No. 6/0.138 in./-32 thd size both ends
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.3750 inches both ends
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
0.3900 inches both ends
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Tapered first end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Tapered second end
MRC:
The element, compound, or mixture of which the bellows are fabricated, excluding any surface treatmentAJGA
Bellows Material:
Stainless steel
MRC:
Indicates the design type of the item.APGF
Design Type:
Bellows
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.250 inches both ends
MRC:
The means by which the item is secured.BSNP
Securing Method:
Unthreaded hole second end
MRC:
The means by which the item is secured.BSNP
Securing Method:
Threaded hole first end
MRC:
The number of threaded holes provided.BSNQ
Threaded Hole Quantity:
1 both ends
MRC:
Indicates the location of a threaded hole on the item.BSNR
Threaded Hole Location:
Both ends: one hole located 90 degrees from unthreaded hole
MRC:
The number of unthreaded holes provided.BSNS
Unthreaded Hole Quantity:
2 both ends
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Counterbore
MRC:
The length of a straight line which passes through the center of the largest portion of the taper,and terminates at the circumference.CFGD
Taper Largest Diameter:
0.3750 inches both ends

{lang[cimilar]} Flexible Shaft Couplings

« Torque Converters and Speed Changers {lang[catalog]}
قارن الآن»
واضح | أخفى