رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
515-5589603detail23-c
معلومات الجزء
Pivot pin hole chamfered 0.031 by 45.0 degrees both sides; rod end undercut 0.125 in.
TXT
وصف:
Rod End Connector
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a rod connection
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand rod connection
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
2.375 inches rod connection
MRC:
The distance from the centerline to the axis of the item.ABGG
Radius:
1.500 inches
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the outside circumference.AGGZ
Shank Outside Diameter:
1.750 inches
MRC:
A measurement taken at right angles to the length of a tongue,in distinction from thickness.AHHE
Tongue Width:
3.000 inches
MRC:
A measurement of the smallest dimension of a tongue,in distinction from length or width.AHHF
Tongue Thickness:
1.000 inches
Shoulder Length:
0.250 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the shank.ATCG
Shanklength:
2.375 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane of a body.AZTN
Bodydiameter:
2.000 inches
MRC:
The distance from the end of the item to the center of the hole.BFKT
Distance From End To Hole Center:
3.375 inches
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.750 inches rod connection
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 606 or copper alloy 614 or copper alloy 630 or copper alloy uns c63200 or copper alloy 642
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-c-465 federal specification all material responses
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Connector
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc rod connection
