رقم الجزء 5166150-1

Sleeve Spacer

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 234.28 and 316.278 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
5166150-1
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
013097142

معلومات الجزء
2 threaded holes 10-32 unf 90 degrees apart; one keyway 0.1870 in. Wide, 0.0930 in. Deepz; 2 slots 0.2810 in. Wide, 2.2810 in. Long drilled through to inside diameter, 180 degrees apart

NSN
رقم المخزون الوطني:
5365-01-309-7142 5365013097142
TXT
وصف:
Sleeve Spacer
INC
INC
رمز اسم العنصر:
13207
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
4.0000 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
1.3800 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 1.0200 inches and 1.0500 inches
MRC:
None.AGFJ
Right Internal Flange Hole Diameter:
Between 0.6260 inches and 0.6300 inches
MRC:
None.AGFL
Right Internal Flange Width:
1.1000 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square all corners
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp m1020
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a575 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Tt-e-490 federal specification single treatment response

{lang[cimilar]} Sleeve Spacers

« Bushings, Rings, Shims and Spacers {lang[catalog]}
قارن الآن»
واضح | أخفى