رقم الجزء 5187856

Double Angle Bracket

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 291.72 and 393.822 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
5187856
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
No qup EA
NIIN:
012218736

معلومات الجزء
1 slot 4.350 in. W by 11.050 in. Lg located on c section, 3 holes 0.154 in. Min and 0.161 in. Maximum diameter located on c section, 12 holes 0.098 in. Min and 0.103 in. Maximum diameter located on turned edge

NSN
رقم المخزون الوطني:
5340-01-221-8736 5340012218736
TXT
وصف:
Double Angle Bracket
INC
INC
رمز اسم العنصر:
20354
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Countersunk and plain
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
0.995 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
1.000 inches
MRC:
The means provided to add strength and/or protection to the item.AFPW
Reinforcement Method (non-core):
Turned edge center section
MRC:
None.AHLF
Second Leg Width:
5.525 inches
MRC:
None.AHLK
First Leg Hole Diameter:
Between 0.123 inches and 0.129 inches
MRC:
None.AHLN
Second Leg Hole Diameter:
Between 0.221 inches and 0.226 inches
MRC:
None.AHLP
Second Leg Distance Between Hole Centers Along Width:
3.500 inches
MRC:
None.AHLV
Second Leg Distance From Edge To Hole Center Along Width:
0.400 inches
MRC:
None.AHLW
Second Leg Distance From Edge To Hole Center Along Length:
0.250 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.125 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.125 inches
MRC:
None.AHPZ
Center Section Height:
12.300 inches
MRC:
None.AHQA
Center Section Width:
4.950 inches
MRC:
None.AHQB
Center Section Thickness:
0.125 inches
MRC:
None.AHQN
First Leg Width:
5.525 inches
MRC:
None.AHQU
First Leg Distance Between Hole Centers Along Width:
3.550 inches
MRC:
None.AHRA
First Leg Distance From Edge To Hole Center Along Width:
0.375 inches
MRC:
None.AHRB
First Leg Distance From Edge To Hole Center Along Length:
0.320 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Cut out
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Two holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Two holes
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
MRC:
None.CSSQ
First Leg Angle:
90.0 degrees
MRC:
None.CSSR
Second Leg Angle:
90.0 degrees
MRC:
None.CWMX
First Leg Cutout Length:
0.620 inches
MRC:
None.CWMZ
First Leg Cutout Width:
3.300 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5052
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/8, h34 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-5541, cl 1a military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Double angle

{lang[cimilar]} Double Angle Brackets

« Commercial Hardware {lang[catalog]}
قارن الآن»
واضح | أخفى