رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
One hole 3.000 in. From right corner 0.161 in. Dia; two holes 1.340 and 4.000 in. From top 4.150 in. From right side 0.196 in. Dia; two holes 7.000 and 8.875 in. From right side 3.685 in. From top 0.169 in. Dia; two holes 11.440 and 12.065 in. From bottom 7.718 and 8.280 in. From right side 0.094 in. Dia
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.250 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
10.800 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
14.150 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.250 inches
Hole Quantity Along Length:
8
Hole Quantity Along Width:
10
Distance Between Holes Along Length:
2.625 inches and 2.500 inches and 2.500 inches and 2.500 inches and 2.625 inches
Distance Between Holes Along Width:
2.500 inches
Distance From First Hole Centerline To End Along Length:
0.770 inches
Distance From First Hole Centerline To End Along Width:
0.400 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.090 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Turnlock fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-5541 class 1a military specification single treatment response
